Give your ideas some space.
Size your area. Drop in designs. Find your line.
Try a photo background Local-only mockup
Choose a photo of your spot, then align the 3D scene with its ground. Use a known measurement to judge scale. This is a visual mockup, not an accurate site survey; obstacles do not hide behind objects in the photo.
JPEG or PNG · up to 10 MB / 32 megapixels. Stays in this tab, is not saved in My spots, and is excluded from JSON, Plan SVG and shared links. Export a Mockup PNG to keep the composite.
No photo loaded.
Enable corner anchors after roughly matching the camera.
Corner guides fit a real 3D perspective camera, keeping obstacle shapes intact. Not every four-point arrangement can match exactly; dashed lines show remaining alignment gaps. Wide-angle lens distortion cannot be corrected here. Camera sliders pause while corner alignment is enabled; uncheck it to return to manual camera controls.
Fine-tune camera sliders
Depth: negative moves farther away; positive moves closer to the camera. Requires Perspective above 0%. This changes the mockup camera alignment, not obstacle dimensions or placement.
Rotate and zoom to match the photo, then choose Move scene to slide the obstacles into place. Lock camera when aligned; use the X/Z and rotation fields to arrange designs. Reset alignment fits the current spot area again.
Add a saved design or upload a JSON file.
Drag a design to move it. Arrow keys move the selection by one grid step (6 inches when snap is off). X/Z are measured from the area’s top-left corner.
Footprints and gaps use axis-aligned bounding boxes, so angled and irregular shapes may show conservative overlap warnings. Overlaps are allowed. This is a concept layout—not a safety, clearance or structural assessment. Leave room for approaches, exits and people.